Pioneer VSX-AX10Ai-G manual 01Before you start, Setting up the remote control

01Before you start

•Do not use the AC adapter or AC adapter cord for any other purpose than those specified below.

1Connect the AC adapter cord then connect the adapter to the recharger and plug it into an AC outlet.

2Place the remote control on the recharger, aligning the indent on the bottom of the remote with the tabs on the recharger.

Note

•The remote control operations in this section are accessed from the remote setup menu. To go to the

remote setup menu, press SETUP from the remote

control Home menu ( ):

HOME 1/3

RECEIVER RECEIVER

INPUT 1		2	3
DVR		TV	SAT
/ LD		/ DVD
DVR		CD	TUNER
/ VCR1
TV		MULTI	SYSTEM
CONT	OPERATION		OFF

SETUP

There are three remote setup menu screens, which can be navigated by using the touch panel (cursor left/right) soft keys:

•When the remote control is recharging, you’ll see the

indicator appear in the upper right corner of the display:

SETUP 1/3

CALIBRATE

PRESET RECALL

LEARNING

MULTI OPERATION

DIRECT FUNCTION

SETUP 2/3

CLOCK DISPLAY : AM/PM

CLOCK SETTING

BEEP :

TIMEOUT

KEY LABEL

Note

•If the remote hasn’t been charged for awhile, the remote control display may remain blank for several minutes before the touch screen appears. If it continues to remain blank, try lifting the remote control up from the recharger and reseating it on the recharger. If after several tries, this does not work, see Replacing the lithium-ion batteries on page 11.

Setting up the remote control

After you have calibrated the screen and set the display clock, use the other settings to customize your remote control.

•For more on navigating the remote control menu screens, see Basic remote control displays on page 31.

Calibrating the remote control screen

This will make sure the remote control responds correctly when you touch it.

1 Press CALIBRATE.

SETUP 1/3

CALIBRATE

PRESET RECALL

LEARNING

MULTI OPERATION

DIRECT FUNCTION

8

En