Pioneer VSX-AX10Ai-G manual 08Controlling other equipment Chapter, Recalling preset codes

08Controlling other equipment

Chapter 8

Controlling other equipment

Using the remote control with other components

The supplied remote control can operate not only this receiver, but also your TV, DVD player and other components. If the component is listed in the remote control's memory, simply follow the steps in Recalling preset codes below. If the component is not listed, or if you want the remote to learn additional operations, see Programming signals from other remote controls on page 68.

Note

•The remote control operations in this section are accessed from the remote setup menu. To go to the

remote setup menu, press SETUP from the remote

control Home menu ( ):

Recalling preset codes

The following steps show you how to recall preset codes for each input source. Use the remote control touch screen to do this.

1Make sure the component you want to control is switched on.

2Press PRESET RECALL on the remote setup menu.

SETUP 1/3

CALIBRATE

PRESET RECALL

LEARNING

MULTI OPERATION

DIRECT FUNCTION

HOME 1/3

RECEIVER RECEIVER

INPUT 1		2	3
DVR		TV	SAT
/ LD		/ DVD
DVR		CD	TUNER
/ VCR1
TV		MULTI	SYSTEM
CONT	OPERATION		OFF

SETUP

SETUP 1/3

CALIBRATE

PRESET RECALL

LEARNING

MULTI OPERATION

DIRECT FUNCTION

3From the ‘Select Function’ screen, choose the input function which matches the connection for the component you want to control.

For example, press DVD/LD if you want to control the DVD player that you connected to the DVD/LD terminals.

Select Function

PRESET RECALL

DVD/LD

•For more on navigating the remote control menu screens, see Basic remote control displays on page 31. See also TV control menu screens on page 34 and Operating menus for additional components on page 35.

•When using a TV, it is often best to use the TV/DVD input for the TV source, and TV CONT for the TV screen or monitor.

	TV/DVD
	SAT
	CANCEL
• Use the	(cursor up/down) buttons to scroll

through the component options.

•You can select any button, but choosing a button that’s already assigned will overwrite the old preset (and any other operations you may have programmed).

66

En