Pioneer VSX-AX10Ai-G manual Checking your surround settings, The Surround Setup menu, Use the

The Surround Setup menu 07

Use the (cursor left/right) hard keys to adjust the setting. The X-Curve is expressed as a downwards slope in decibels per octave, starting at 2kHz. The sound becomes less bright as the slope increases (to a maximum of -3.0dB/oct). Use the following guidelines to set the X-Curve according to your room size:

Room size (m2)	≤36	≤48	≤60	≤72	≤300	≤1000
X-Curve (dB/oct)	–0.5	–1	–1.5	–2	–2.5	–3

5 Select ‘Return’ then press ENTER to finish.

Note

•Since the principal is the same, X-Curve isn’t applied when you’re using any of the Home THX modes (see Using the Home THX modes on page 43).

Checking your surround settings

You can check through the receiver settings screen by screen after you’re finished using the Surround Setup.

1Select ‘Check’ from the Surround Setup menu and press ENTER.

2.Surround Setup

[ Check ]

[ 1.Speaker Systems ] [ 2.Channel Level ]

[ 3.Speaker Distance ] [ 4.Acoustic Cal EQ ] [ 5.X-Curve ]

	[Return]
2 Use the	(cursor left/right) hard keys to

cycle through the settings screen by screen.

These appear in the same order as the Surround Setup menu. Select Return then press ENTER to go back to the Surround Setup menu.

65

En