11 | DISASSEMBLY PROCEDURE |
| |
Be careful when removing heavy parts. | |||
| OPERATION PROCEDURE | PHOTOS & ILLUSTRATIONS | |
1. REMOVING THE LOWER SIDE OF THE INDOOR | Figure 1 |
| |
UNIT FROM THE INSTALLATION PLATE |
| ||
(1) Remove the front panel. |
|
| |
(2) Insert the screw driver to the corner hole at both left and |
|
| |
| right side as shown in the figure 1. |
| Push |
(3) Push it up, then pull down the lower side of indoor unit and |
| ||
| remove the hook. |
|
|
|
|
| Corner hole |
|
| Be careful |
|
|
| not to damage | |
|
| the airflow |
|
|
| adjustment |
|
|
| plate with the | Push Down |
|
| screw driver. |
2. REMOVING THE FRONT PANEL | Photo 1 |
| |
(1) | Press and unlock the knobs on both sides of the front |
| |
|
| ||
| panel and lift the front panel until it is level. Pull the hinges | Vanes | Front panel |
| forward to remove the front panel. (See Photo 2) | ||
|
|
| |
(2) | Move the horizontal vanes in a downward direction. |
|
|
(3) | Remove the screw caps of the panel. Remove the screws. |
|
|
| (See Photo 1) |
|
|
(4)Hold the lower part of both ends of the panel and pull it slightly toward you, and then remove the panel by pushing
it upward.
Screw caps
Photo 2
29