●Wired remote controller (Option)
Display Section
“Sensor” indication
Displays when the remote controller
For purposes of this explanation, all parts of the display are shown. During actual operation, only
the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc. *Multilanguage display is available.
“Centrally Controlled”indicator
Indicates that operation from the remote controller has been prohib- ited by a master controller.
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off timer is set.
If the simple or Auto Off timer is set, the time to be switched off is shown.
TIME SUN MON TUE WED THU FRI SAT | ||
TIMER | Hr | ON |
AFTER | AFTER | OFF |
ERROR CODE |
| FUNCTION |
°F°C |
| FILTER |
°F°C |
| |
| WEEKLY | |
ONLY1Hr. |
| SIMPLE |
| AUTO OFF | |
sensor is used.
“Locked” indicator
Indicates that remote controller but- tons have been locked.
“Clean The Filter” indicator
To be displayed on when it is time to clean the filter.
Timer indicators
The indicator comes on if the corre- sponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
“Timer is Off” indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Up/Down Air Direction indica- tor
The indicator
shows the direc- tion of the outcoming airflow.
“One Hour Only” indicator
Displays if the airflow is set to low or downward during COOL or DRY mode. (Operation varies according to model.)
The indicator goes off in 1 hour, when the airflow direction also changes.
Room Temperature display
Shows the room temperature. The room temperature display range is
Louver display
Indicates the action of the swing louver. Does not appear if the louver is not running.
(Power On indicator)
Indicates that the power is on.
Ventilation indicator
Appears when the unit is running in Ventilation mode.
Operation Section
Temperature setting buttons |
|
|
|
Down |
|
|
|
Up |
|
|
|
Timer Menu button |
|
|
|
(Monitor/Set button) |
|
|
|
Mode button (Return button) |
|
|
|
|
| TEMP. |
|
Set Time buttons |
|
|
|
Back |
| MENU | ON/OFF |
Ahead | BACK | MONITOR/SET | DAY |
| |||
Timer On/Off button | CLOCK | ||
(Set Day button) |
|
|
|
Opening the |
|
|
|
cover |
|
|
|
| ON/OFF |
|
| FILTER | |
| CHECK | TEST |
OPERATION | CLEAR |
|
ON/OFF button
Fan Speed button
Filter 
button (<Enter> button)
Test Run button
Check button (Clear button)
Airflow Up/Down button
Louver button
(
Operation button)
To return operation number
Ventilation button
(
Operation button)
To go to next operation number
Note:
•“PLEASE WAIT” message
This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power failure.
•“NOT AVAILABLE” message
This message is displayed if an invalid button is pressed (to operate a function that the indoor unit does not have).
If a single remote controller is used to operate multiple indoor units simultaneously that are different types, this message will not be displayed as far as any of the indoor units is equipped with the function.
5
