Momentum Sales & Marketing MO8ME manual Mo8me Enclosure, Digit readout display and control keys

Chapter 1 Overview

The mo8me Enclosure

The mo8me enclosure can be used in a number of different configurations depending on the needs of the end user. Units are shipped with rack ears, which can be front or rear mounted or can rotate for vertical or horizontal surface mounting. Optional rubber stage boots allow the units to be used as stage boxes.

An optional contractor panel can be ordered, which then allows the end user to terminate all analog connections with simple “phoenix” screw terminal connectors or utilize a standard DB25 “break out cable” instead of the front panel XLR connectors. This also allows passive “splitting” of the analog signals if needed. Pro Co offers whatever breakout cables you need. Just ask for them when you order your system.

mo8me Front View with Rack Ears mo8me Front View with optional Stage Boots

Front Panel

The front of the mo8me has a 2-key control panel, eight channels capable of any combination of eight mono and four stereo output mixes and an antenna for remote mixing. Each channel has one signal / clip LED indicator that is visible on the front panel.

The control panel includes a power LED, status LED,	7
a 3-digit readout display and control keys.

6

5

3 4

Index Description

1Signal/Clip LED Green = -40dB F.S. or above; Red= -3dB F.S. or above

		2	Stereo Channel	mo8me offers 4 stereo channels
		3	Display	Three character LCD display
1		4	F1 & F1 Selectors	Select and edit mo8me functions
		5	Status LED	Green = Audio sync present;
				Red = Network fault
	2	6	Power LED	Green = Digital power OK
		7	Antenna	Communicates with mrc

Momentum mo8me Manual 8