Chapter 4 | The Tweak: Overview and Setup |
|
|
Connecting to a mo8me Unit
•Press encoder until Mix Master Menu comes up
•Press SETUP soft key
•Press MO8ME soft key on Setup screen to view the New Unit screen
•The CURRENT: AXX shows address of the mo8me currently connected to the Tweak
•The mo8me address corresponds to the least significant byte of the mo8me’s IP address, such as A01 = 192.168.1.1
•Turn the encoder to select the new address, NEW: AXX will display new address (i.e. A03)
•Press SAVE soft key to save the new address
•Press EXIT to return to Setup Menu
Selecting Mono or Stereo Mode
•Press encoder until Mix Master Menu comes up
•Press SETUP soft key
•Press ST/MONO soft key on Setup Menu to view the Out Mode screen
•The display shows pairs of mix channels shown as MIX X & Y (i.e. MIX 1 & 2, Mix 3 & 4)
•Press the PREV MIX / NEXT MIX soft keys to scroll through mix channels
•Turn the encoder to select STEREO or MONO mode
•Press the SAVE soft key to save the setting
•Press EXIT to return to Setup Menu
The following is a sample of the Select Mix Menu displaying a combination of mono and stereo channels. Out 1 indicates mix channels 1 and 2 are in stereo. (Use soft keys 1 or 2 to select Out 1);
Out 3, 4, 5 and 6 are in mono; Out 7 indicates mix channels 7 and 8 are in stereo. (Use soft keys 7 or 8 to select Out 7)
Momentum mo8me Manual | 24 |
