Monessen Hearth CDV7 manual Finishing Material

CDVSC7 & CDV7 Series Gas Fireplace SECURE FIREPLACE to floor or framing

The fireplace must be secured to the floor and/or to framing studs as shown in Figure 7. Use two (2) wood screws or masonry/ concrete screws to secure fireplace to the floor. Use four (4) screws to attach fireplace to framing. The side nailing flanges are 1/2" or 5/8" to accom- modate different wall thickness.

Framing

Nailing

Flange

Screws

Nailing

Flange

Screw

Drywall Support Tabs (Do Not Use for Framing or Header)

Framing

Screw

Nailing

Flanges

Figure 7 -

Securing Fireplace to Floor and

Framing Studs (CDVT36 shown)

Screw

Screw

FP2287

Finishing Material

NOTE: Any wiring (i.e. remote control, wall switch, and optional fan) must be done prior to final finishing to avoid costly reconstruction.

Only noncombustible materials (i.e. brick, tile, slate, steel, or other materials with a UL fire rating of Zero) may be used to cover the black surface of the appliance. A 300°F minimum adhesive may be used to attach facing materials to the black surface. If joints between the finished wall and the fireplace surround are sealed, a 300°F minimum sealant material (General Electric RTV103 or equivalent) must be used.

12 69D3011