CLEANING AND MAINTENANCE
Make sure the gas valve knob is in the “OFF” position. Wait at least five (5) minutes before start- ing maintenance.
VENTING SYSTEM
A qualified agency should examine the venting system annually.
CLEANING GLASS
Clean the ceramic glass periodically. Condensation will some- times form on the glass during a cold startup. This is normal for all gas fireplaces and inserts. This condensation often attracts dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave a slight film on the glass. This is a temporary problem.
CAUTION
Let glass cool before cleaning. Do not clean glass when it is hot. Damage could occur.
Your should clean the glass after the first two weeks of use. After that, you should clean the glass no more than two or three times a season. Use a mild glass cleaner to clean the door. Do not use abrasive cleaners. They will damage the glass surface.
PILOT AND
BURNER FLAMES
Visually check pilot and burner flames periodically. See Figure 41 for typical burner flame. See Figure 42 for typical pilot flame.
Figure 41 - Typical Burner Flame
Thermocouple
Thermopile
Figure 42 - Typical Pilot Flame
32 | 57D0016 |
