PRODUCT FEATURES AND CODE APPROVAL
PRODUCT SPECIFICATIONS
•This appliance has been
certified for use with either natural or propane gas. See appropriate data plates.
• This appliance is not for use with solid fuels.
• The appliance is approved for bedroom or bedsitting room installations.
•The appliance must be installed in accordance with
local codes if any. If none exist use the current instal- lation code. ANSI Z223.1/ NFPA 54 in the USA, CAN/ CGA B149 in Canada.
• The appliance must be prop- | Optional |
|
| ||
| erly connected to a venting | Remote |
|
| |
| system. | Receiver |
|
| |
|
| Blower Knob |
| ||
WARNING | by local codes. |
| On/Off Switch |
| |
| Gas |
| |||
| This appliance may be installed | Piezo Ignitor |
| ||
| inanaftermarket*,permanently |
|
| ||
| l o c a t e d , m a n u f a c t u r e d | Hi/Lo Knob |
| ||
| home, where not prohibited | Off/Pilot/On Knob |
| ||
|
|
| Shutoff | On/Off/ | |
* Aftermarket: Completion of sale, not for | Remote Switch | ||||
Valve | |||||
| |||||
purpose of resale, from the manufacturer. |
|
| |||
Figure 1 - IDV490NVC, IDV490PVC, IDV380NVC, and IDV380PVC Inserts
The efficiency rating of this appliance is a product thermal efficiency rating determined under continuous operating condi- tions and was determined independently of any installed system.
Thermal Efficiency = up to 80%
CODE APPROVAL
These appliances have been tested by CSA and found to comply with the established standards for VENTED GAS FIRE- PLACE HEATERS in the USA and Canada as follows:
LISTED VENTED GAS FIREPLACE HEATER
TESTED TO: ANSI
ATTENTION MASSACHUSETTS RESIDENTS:
This product must be installed by a licensed gas fitter.
57D0016 | 5 |
