INSTALLATION
INSERT PLACEMENT
•Insert must be placed within a
•Because the insert uses a circulation blower, clean the fireplace, smoke shelf, and chimney before installing.
•This heater may be placed in a bedroom. Please be aware of the large amount of heat this appliance produces when determining a location.
For tight fits you may remove the manifold.
See “Removing the Mainfold,” page 16.
For Minimum Dimension,
See Page 7
Run the on/off switch wires to the right — behind the surround panels
(See Page 24)
For Minimum Dimension, See Page 7
The insert
protrudes into the fireplace. See Page 7 for Dimension.
The gas line
should be installed
prior to insert
placement.
Use the leveling
bolts for fireplaces with recessed floors
Run the power
cord either side of
the insert along
the face.
Figure 4 - Insert Placement
10 | 57D0016 |