Diagnostics

B

FieldDescription

employed on the 1394 interface

Copy Control - level of copy control in the 1394 content. Valid values include: ‘Copy Free’, ‘Copy Once’, ‘No Copies’, ‘Copy Never’.

Nodes - indicates if the set-top terminal is the cycle master node, the IRM node, and/or the root node on the 1394 bus.

Loop Detected - indicates if a loop exists on the 1394 bus.

EUI – device identifier

Number of connected devices and associated device Identifier

MPEG4 Passthrough – indicated if MPEG4 content is passed through to the 1394 device. The user can enable or disable MPEG4 Passthrough by pressing the MENU key while on the 1394 Status OSD diagnostics screen (selection mode is indicated by ‘>>>’), then pressing SELECT key to toggle between Enable and Disable.

DVR/Hard Drive Status

This three-page diagnostic displays the DVR and hard-drive status.

Figure 41: DVR/Hard Drive Status Diagnostic Screens

High-Definition DVR DCX3510-M • Installation Manual

80

365-095-17066-x.1

Page 87
Image 87
Motorola DCX3510-M installation manual DVR/Hard Drive Status Diagnostic Screens