Motorola DCX3510-M Operational Check for the Remote Control, Operational check procedures

Installation

Operational Check for the Remote Control

The operational check tests communication with the remote control:

	Table 3: Operational check procedures
Feature	Testing Procedure
Power on	Press power on the remote control to turn on the DCX3510-M.
	Tune to the output channel (3 or 4), if using the RF output.

B

Channel	Scan through the channels using the channel + or - keys.
selection	Tune to several channels by entering the channel number using the numeric keys.
Volume	Press volume + or - on the remote control to increase the volume to its upper limit,
control	lowest level, and to a comfortable level.
	Press mute to turn the sound off. Press mute again to restore the sound.

If the DCX3510-M does not operate properly, refer to the Troubleshooting section.

High-Definition DVR DCX3510-M • Installation Manual 31

365-095-17066-x.1