RS-232 Interface 7 - 3

RS-232 Default Parameters

Table 7-1 lists the defaults for RS-232 host parameters. To change any option, scan the appropriate bar code(s)
provided in the param eter descriptions section beginning on page 7-4.
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 7-1
RS-232 Host Default Table
Parameter Default Page
Number
RS-232 Host Parameters
RS-232 Host Types Standard RS-232
7-6
Baud Rate 9600
7-7
Parity None
7-9
Check Receive Errors Enable
7-10
Stop Bit Select 1 Stop Bit
7-10
Data Bits 8-Bit
7-11
Hardware Handshaking None
7-11
Software Handshaking None
7-13
Host Serial Response Time-out Minimum: 2 sec
7-15
RTS Line State Host: Low RTS
7-16
Beep on <BEL> Disable
7-11
Intercharacter Delay Minimum: 0 msec
7-17
Nixdorf Beep/LED Options Normal Operation
7-18
Ignore Unknown Characters Send Bar Code
7-19