7 - 10 Symbol DS3478 Product Reference Guide

Check Receive Errors

Select whether or not to check the parity, framing, and overrun of received char acters. The p arity value of rece ived
characters is verified against the parity parameter selected previously.

Stop Bit Select

The stop bit(s) at the end of each transmitted character marks the end of transmission of one character and
prepares the receiving device for the next character in the ser ial data stream. Se lect the number of stop bit s (one or
two) based on the number the receiving terminal is programmed to accommodate. Set the number of sto p bits to
match host devic e re qu ire m en ts.
*Check For Received Errors
(Enable)
Do Not Check For Received Errors
(Disable)
*1 Stop Bit
2 Stop Bits