7 - 16 Symbol DS3478 Product Reference Guide

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select the Low RTS or
High RTS line state.

Beep on <BEL>

Single Point Mode Only
If you enable this parameter, the digital scanner issues a beep wh en it dete cts a <BEL> charact er on the RS -2 32
serial line. <BEL> indicates an illegal entry or other important event.
*Host: Low RTS
Host: High RTS
NOTE This parameter is not supported in Multipoint mode.
Beep On <BEL> Character
(Enable)
*Do Not Beep On <BEL> Character
(Disable)