4 - 2 Symbol DS3478 Product Reference Guide
Scanning Sequence Examples
In most cases, scan only one bar code to set a parameter valu e. For example, to set th e beepe r tone to high, scan
the High Frequency (beeper tone) bar code under Beeper Tone on page 4-4. The digital scanner issues a fast
warble beep and the LED turns green, indicating a successful p arameter entry.
Other parameter s, such as Decode Session Timeout, require scanning several bar codes. See the parameter
description for this pr oc ed u re .
Errors While Scanning
Unless otherwise specified, if you make an error during a scanning sequence, re-scan the correct parameter.
User Preferences Default Parameters
Table 4-1 lists the default s fo r user preferen ce par ameters. To change any option, scan the appropriate bar code (s)
provided in User Preferences on page 4-3.
NOTE See Appendix A, Standard Default Parameters for all user preference, host, symbology, and
miscellaneous default parameters.
Table 4-1
User Preferences Default Table
Parameter Default Page
Number
User Preferences
Set Default Parameter All Defaults
4-3
Parameter Scanning Enable
4-3
Beeper Tone Medium
4-4
Beeper Volume High
4-5
Power Mode Reduced
4-5
Beep After Good Decode Enable
4-6
Picklist Mode Disabled Always
4-7
Decode Session Timeout 3.0 seconds
4-8
Fuzzy 1D Decoding Enable
4-8
Decode Mirror Images Never
4-9
Connection Maintenance Interv al 15 minutes
4-10
Radio Output Power Bluetooth Class 1
4-12
Parameter Broadcast Enable
4-12
Single Point/Multipoint Operation Single Point
4-13