Overview
DSP56012 Features

MOTOROLA DSP56012 User’s Manual 1-7

– PLL-based clocking with a wide range of frequency multiplications (1 to
4096) and power saving clock divider (2
i
: i = 0 to 15), which reduces clock
noise
– Four 24-bit internal data buses and three 16-bit internal address buses for
simultaneous accesses to one program and two data memories
• Memory
– Modified Harvard architecture allows simultaneous access to program and
data memories
– 15360
×
24-bit on-chip Program ROM1
– 4096 × 24-bit on-chip X-data RAM and 3584 × 24-bit on-chip X-data ROM*
– 4352 × 24-bit on-chip Y-data RAM and 2048 × 24-bit on-chip Y-data ROM*
– 256 × 24-bit on-chip Program RAM and 32 × 24-bit bootstrap ROM
– As much as 2304 × 24 bits of X- and Y-data RAM can be switched to
Program RAM, giving a total of 2560 × 24 bits of Program RAM
Table 1-2 lists the memory configurations of the DSP56012.
• Peripheral and Support Circuits
– SAI includes:
• Two receivers and three transmitters
• Master or slave capability
•I
2S, Sony, and Matshushita audio protocol implementations
1.These ROMs may be factory programmed with data/program provided by the application developer.
Table 1-2 DSP56012 Internal Memory Configurations
No Switch
(PEA=0, PEB=0) Switch A
(PEA=1, PEB=0) Switch B
(PEA=0, PEB=1) Switch A+B
(PEA=1, PEB=1)
P: RAM 0.25 K 1.0 K 1.75 K 2.5 K
X: RAM 4.0 K 3.25 K 3.25 K 2.5 K
Y: RAM 4.25 K 4.25 K 3.5 K 3.5 K
P: ROM 15 K 15 K 15 K 15 K
X: ROM 3.5 K 3.5 K 3.5 K 3.5 K
Y: ROM 2.0 K 2.0 K 2.0 K 2.0 K