Motorola E1000 Removing and Replacing the Battery Shield, To remove the battery shield

Models: E1000

1 42
Download 42 pages 61.34 Kb
Page 23
Image 23

Level 1 and 2 Service Manual

Disassembly

Removing and Replacing the Battery Shield

GThis phone contains static-sensitive devices. Use anti-static handling procedures to prevent electrostatic discharge (ESD) and component damage.

To remove the battery shield

1.Ensure the phone is off.

2.Follow the procedures to remove the:

battery door

battery

SIM card

front housing

rear housing

3.Using tweezers, disengage the metal tab of the battery shield from the rear housing and snap the battery shield out the rear housing.

Metal Tab

Figure 8. Removing the Battery Shield

To replace the battery shield

1.Align the battery shield with the rear housing and snap it into place.

2.Follow the procedures to replace the:

transceiver board

front housing

SIM card

battery

battery door

6809490A73

October 4, 2004

23

Page 23
Image 23
Motorola E1000 Removing and Replacing the Battery Shield, To remove the battery shield, To replace the battery shield