Disassembly

E1000

3.Turn the transceiver board over and using the disassembly tool, disengage the joystick flex connector and lift it off of the transceiver board.

Latch

Joystick Assembly

Latch

Flex

Connector

Disassembly

Tool

Figure 12. Removing the Joystick Assembly

To replace the joystick assembly

1.Align the joystick flex connector with the connector on the transceiver board and press it into place

1.Align the joystick assembly with the transceiver board and press it into place.

2.Follow the procedures to replace the:

rear housing

front housing

SIM card

battery

battery door

28

October 4, 2004

6809490A73

Page 28
Image 28
Motorola E1000 service manual To replace the joystick assembly, Removing the Joystick Assembly