Motorola E1000 Removing and Replacing the Speaker Assembly, To remove the speaker assembly

Models: E1000

1 42
Download 42 pages 61.34 Kb
Page 26
Image 26

Disassembly

E1000

Removing and Replacing the Speaker Assembly

To remove the speaker assembly

1.Follow the procedures to remove the:

Battery door

Battery

SIM card

front housing

rear housing

2.Using a Torx driver with a T-6 bit, remove the 2 screws securing the speaker assembly to the transceiver board.

3.Lift the assembly off of the transceiver board.)

Figure 11. Removing the Speaker Assembly.

To replace the speaker assembly

1.Align the speaker assembly with the transceiver board and press it into place.

2.Insert and tighten the 2screws to a torque setting of 1.2 in/lbs, using the T-6 Torx driver. Do not overtighten.

3.Follow the procedures to replace the:

rear housing

front housing

SIM card

battery

battery door

26

October 4, 2004

6809490A73

Page 26
Image 26
Motorola E1000 service manual Removing and Replacing the Speaker Assembly, To remove the speaker assembly