![](/images/new-backgrounds/1297495/29749561x1.webp)
Level 1 and 2 Service Manual | Disassembly |
Removing and Replacing the Camera
To remove the camera
1.Follow the procedures to remove the:
•Battery Door
•Battery
•SIM card
•Front Housing
•Rear Housing
•Joystick Assembly
•Display Assembly
2.Use the disassembly tool to gently pry the camera flex connector from its socket and remove the camera.
Camera Flex | Disassembly |
Connector | Tool |
Figure 14. Removing the Camera
To replace the camera
1.Align the camera flex connector with its socket on the transceiver board and gently press it in until it’s fully seated.
2.Follow the procedures to replace the:
•display assembly
•joystick Assembly
•rear Housing
•front Housing
•SIM card
•battery
•battery Door
6809490A73 | October 4, 2004 | 31 |