Accessories 6 - 13
Debit Card ReaderThe DCR7X00-100R Debit Card Reader (DCR) snaps onto the bottom of the MC75 to allow easy data capture with
the swipe of a magnetic stripe card and personal identification number (PI N) entry using a numeric keypad.
Getting Started
When using the DCR for the first time, charge the DCR in a cradle for a minimum of three hours.
Installation
1. Align the DCR with the bottom of the MC75 and push up until the locking tabs snap into place.
Figure 6-13
DCR Installation
2. Pull on the DCR to ensure it is securely connected to the MC75.
Removal
To remove the DCR from the MC75, push in the bottom of the two locking tabs and pull the DCR from the MC75.