SCAN
DELETING A NUISANCE CHANNEL/ TALKGROUP (SYSTEM SCAN OPERATION ONLY)
If a talkgroup or channel continually generates unwanted calls (a “nuisance” channel), use the preprogrammed Scan button to temporarily delete the talkgroup or channel from the Scan list.
To temporarily delete the channel/ talkgroup:
1While the radio’s receiving activity is on the nuisance channel, press and hold the Scan button until you hear a
2Release the Scan button. The nuisance channel has been temporarily deleted from your Scan list.
Restoring a Channel/Talkgroup Back to the Scan List
To restore a previously deleted talkgroup or channel back to the Scan list, restart the scan operation or turn your radio off and on again.
50
EDITING A SCAN LIST (SYSTEM SCAN OPERATION ONLY)
One Scan list is assigned to each of the 16 positions on the Zone/Channel Selector knob. Each Scan list can contain up to 16 talkgroups and/or channels. The same talkgroup or channel can be included in several Scan lists, and the same Scan list can be assigned to several Zone/Channel Selector positions.
When you edit a Scan list, you can either add, delete, or prioritize talkgroups or channels:
Position 2 | Position 2 |
|
|
1 | 1 |
|
|
3 | 2 |
|
|
5 | 3 |
|
|
6 | 11 |
|
|
Your radio cannot receive any calls while you are editing a scan list. Kdisplays while you are in edit mode.
Note: In Conventional operation only, even if there is activity on a
English
