Motorola HT1550XLS manual Phone, English, Xxx-Xxx-Xxxx, or-see step

5(For conventional operation with auto access only). You hear a series of tones, indicating that an access code is being sent automatically, and see your access code:

–or–

Enter your access code using the keypad.

6When you hear a dial tone:

Enter the phone num-	XXX-XXX-XXXX
ber using the keypad.
–or–	Enter Phone #
mto select a
number from the	XXX-XXX-XXXX
phone list.
–or– (see step 7)

7a) Press and release the preprogrammed Speed Dial button (see step 2 on page 55) to use the Speed Dial feature.

b)Press the key (1 to 9) corresponding to the number you want to call, or press 0 if you want to call the last number dialed.

Note: To redial the last number dialed (if not using Speed Dial), press and release the PTT button immediately after the access code is sent. The radio sends the last number dialed.

–or–

If you entered your access code using the keypad, press the mkey

once to access the last number dialed; then press and release the PTT button.

8Press and release the PTT button, if required for your radio.

9Hold the radio in a vertical position with the microphone 1 to 2 inches (2.5 to 5 cm) away from your mouth. Press the PTT button to talk; release it to listen.

57

PHONE

English