GETTING STARTED
28
i600
RECEIVING A GROUP CALL
No action is necessary to receive a Group Call as long as your unit is
not busy in an active Phone or Private Call.
Any communication activity within the talkgroup that you select
automatically switches your unit into Group mode. You will receive
the talkgroup transmission as long as your phone is powered on.
AREA SELECTION
When in Group mode, you can send your communication only to
those talkgroup members in a specific location. This is useful when
you know where the individuals are located within the service area.
1. Press until you see “Group Ready” on your display.
2. Press under “Area”.
3. Press to scroll through the targeted areas specified by
your local service provider.
4. Press under “Ok” to select the targeted area. The area
selected appears on the last line of your display.
TALKGROUP NAMING
To add a talkgroup name to your portable phone, press
.
For instructions on programming IDs and aliases, see “Private Call
ID Programming” on page 26.
Group Call i600 Page 28 Tuesday, June 9, 1998 10:16 AM