Set Environment to Bug/Operating System
A-11
A
Slave Ending Address #2 00000000 Ending address of the local resource that
is accessible by the VMEbus. Default is 0.
Slave Address Translation
Address #2
00000000 Works the same as Slave Address
Translation Address #1. Default is 0.
Slave Address Translation
Select #2
00000000 Works the same as Slave Address
Translation Select #1. Default is 0.
Slave Control #2 0000 DeÞnes the access restriction for the
address space deÞned with this slave
address decoder. Default is $0000.
Master Enable #1 [Y/N] Y Yes, set up and enable the Master Address
Decoder #1.
Master Starting Address #1 02000000 Base address of the VMEbus resource that
is accessible from the local bus. Default is
the end of calculated local memory,
unless memory is less than 16MB, then
this register will always be set to
01000000.
Master Ending Address #1 EFFFFFFF Ending address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated memory.
Master Control #1 0D DeÞnes the access characteristics for the
address space deÞned with this master
address decoder. Default is $0D.
Master Enable #2 [Y/N] N Do not set up and enable the Master
Address Decoder #2.
Master Starting Address #2 00000000 Base address of the VMEbus resource that
is accessible from the local bus. Default is
$00000000.
Master Ending Address #2 00000000 Ending address of the VMEbus resource
that is accessible from the local bus.
Default is $00000000.
Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options Default Meaning of Default