Chapter 7 Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide 97
Clear SNMP Trap Command
Use the clear snmp trap command to clear an entry from the SNMP trap
receiver table.
The syntax for this command is: clear snmp trap <rcvr_addr | all>
Example:
Console>(enable) clear snmp trap 192.122.173.82
SNMP trap receiver deleted.
Console>(enable)
Clear Vlan Command
Use the clear vlan command to delete an existing VLAN from a management
domain and return to its default. When you clear a VLAN, all ports assigned to that
VLAN are assigned to the default VLAN # 1.
The syntax for this command is: clear vlan [vlan_num]
Example:
This example shows how to clear an existi ng VLAN (VLAN 4) from a management
domain:
Console>(enable) clear vlan 4
This command will assign all ports on vlan 4 to their default
in the entire management domain
Do you want to continue (y/n) [n]? y
VLAN 4 deletion successful
Console>(enable)
rcvr_addr IP address or IP alias of the trap receiver (the SNMP management
station) to clear.
all Keyword that specifies every entry in the SNMP trap receiver table
vlan_num Number of the VLAN (range is 2 to 3071).