Chapter 7 Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide 99
Reset Commands
Reset Command
Use the reset command to restart the Cajun P120 module.
Console>(enable) reset
This command will reset the module and may disconnect your
telnet session.
Do you want to continue (y/n) [n]? y
Resetting module ...
Console>(enable).
Reset System Command
Use the reset system command to return the Cajun P120 module parameters
back to factory default settings.
Console>(enable) reset system
This command will reset the module and force factory default.
Do you want to continue (y/n) [n]? y
Console>(enable).
Show License Command
Use the show license command to display installed application Software
Licenses installed.
The syntax for this command is: show license
Example:
Console> show license
Application
------------ License Key
------------------------------------
SMON 0000 0000 0000 0000 0000 0000