Chapter 6 Legacy CLI (Command Line Interface)
40 Cajun P120 User’s Guide
Ping <IP_address> {#times} Pings the IP address; default is four times
Use the Ctrl+Q command to stop the pinging.
revision Displays revision information for the various
components.
rnds [on|off] This is reserved for technical personnel only.
service This is reserved for technical personnel only.
show <all|group> [list]
<port#|index_value>
Example: show ip
Displays the current configuration settings for
a specific group or port. If you have made any
changes using the CLI, they are listed in a
column on the left (administration) and the
current operational configuration is in a
column on the right.
shLAG <group#|all> Shows all ports that are assigned to a link
aggregation group.
shport D isplay a table of all ports.
simple-setup
This command is only available in
Normal level.
For the configuration of the initial parameters
needed for the Cajun P120, including its IP
address.
vlantab Displays a table with VLAN assignments of
ports.
Table 6.1 Normal Level Commands (Continued)
Command Syntax Function