Chapter 2 Cajun P120 Front and Back Panels
Cajun P120 User’s Guide 11
Note: All LEDs are lit during a reset.
COL Collision OFF – No collision or FDX port
ON – Collision occurred on line
Tx Transmit to line OFF �� No transmit activity
ON – Data transmitted on line
Rx Receive from line OFF – No receive activity
ON – Data received from the line
FDX Half/Full Duplex OFF – Ha lf duplex mode
ON – Full duplex mode
FC Symmetric Flow
Control
OFF – Asymmetric Pause mode is enabled for
the Gigabit Ethernet port or Flow Control is
disabled for the 10/100 port.
ON – Flow Control (Symmetric Pause only)
mode is enabled for the 10/100 or Gigabit
Ethernet port.
100M 10/100 Mbps OFF – 10Base-T port or 1000Base-X port
ON – 100Base-TX or 100Base-FX port
LAG Link Aggregation
Group (LAG or
Trunking)
OFF – No LAG defined for this port
ON – Port belongs to a LAG
Table 2.1 Cajun P120 LED Descriptions (Continued)
LED Name Description LED Status