Chapter 6 Legacy CLI (Command Line Interface)
Cajun P120 User’s Guide 57
Spanning Tree Group (STA-GEN)
This group includes parameters to enable the spanning tree algorithm (IEEE 802.1D
and RFC 1493) and set its parameters. The table below disp lays the parameters, a
description of the parameters, the default values, and the valid rang e of values.
The syntax for this command is:
set|show sta-gen
Table 6.9 STA-GEN Group Parameters
Parameter Description Default
Value(s) Valid Range
for Values
STA-PRIO Switch priority 8000 0000-FFF F
STA-MODE Enables Spanning Tree dis ena, dis
STA-PRIO Priority setting (hexadecimal value) used for determining the
Root switch/bridge. The Bridge ID, based on the priority and
the MAC address, is a unique value for each participant in the
Spanning Tree algorithm.
STA-MODE Enables or disables Span ning Tree for the Cajun P120 switch.