Chapter 7 Cajun Campus CLI (Command Line Interface)
Cajun P120 User’s Guide 79
Show Port Flowcontrol Command
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [slot_num[/port_num]
Example:
This example shows how to display the flow-control port status a nd statistics:
Console> show port flowcontrol
Output Fields
slot_num Module number (always 1)
port_num (Optional) Number of the port on the module. If you do not specify
a number, filters configured on all the Cajun P120 ports are shown.
Port Send-Flow Control Receive-Flow Control
----- Admin
---------- Oper
------ Admin
-------- Oper
--------
1/1 on on on on
1/2 off off off off
Field Description
Port Module and port number.
Send-Flow
Control- Admin
and
Send-Flow
Control- Oper
Flow-control administration. Possible settings:
• ON indicates the local port sends flow control to the f ar
end;
• OFF indicates the local port does not se nd flow control
to the far end;
Receive-Flow
Control- Admin
and
Receive-Flow
Control- Oper
Flow-control administration. Possible settings:
• ON indicates the local port require s the far end to send
flow control;
• OFF indicates the local port does not al low the far end
to send flow control;