Chapter 7 Cajun Campus CLI (Command Line Interface)
78 Cajun P120 User’s Guide
Show Module Command
Use the show module command to display the Cajun P120 status and information.
If an expansion sub-module is installed it’s type and status are also shown.
The syntax for this command is: show module [slot_num]
Example:
Console> show module
Output Fields
slot_num Module number (always 1)
Mod
--- Module-Type
----------- Ports
----- Serial-Num
---------- C/S
---- Hw
---- SwVersion
----------
1 CajunP120 Base 24 4.0 Bank A: 1.0
Bank B: 1.0
Mod
--- Expansion-Type
-------------- Ports
----- Serial-Num
---------- C/S
---- Hw
---- SwVersion
----------
1 CajunX120S2 2
Field Description
Mod Module number (always 1)
Module-Type Module type: Cajun P120 Base module or Expansion sub-module
Expansion-
Type Expansion board Type
Ports Number of ports
Serial-Num Serial number
C/S Configuration Symbol
Hw Hardware version
Sw Version Current Software version running on the Cajun P120