Motorola WU830G manual Setting Security for a Wireless Network or a Profile

SECTION 3			CONFIGURATION
	Network Authentication		Data Encryption
	Option	Description	Option	Description
	WPA-PSK	For infrastructure environments	TKIP	A network
		without the RADIUS infrastructure.		key is used
		WPA-PSK supports the use of a		(more
		pre-shared key. WPA-PSK is the		secure).
		next generation of wireless network
		security for home and small office
		environments.
	WPA	The network operates in IEEE	TKIP with	A network
		802.1x authentication mode. This	four EAP	key is used
		mode is for environments with a	methods:	(more
		Remote Access Dial-In User Service	TLS	secure).
		(RADIUS) infrastructure.	TTLS
		This authentication is usually used
			PEAP
		by enterprise business systems or
		large corporations.	LEAP
		In a RADIUS environment, various
		Extensible Authentication Protocols
		(EAPs) are supported. These may
		include TLS, TTLS, PEAP, and
		LEAP.

Setting Security for a Wireless Network or a Profile

To set up security for a selected wireless network or profile:

1Select a wireless network on the Site Monitor tab and click Connect or enter profile information on the Profile tab and click Set Security. The Motorola Security Configuration window is displayed.

2Select the Authentication.

3Select the Encryption Status.

4If necessary, enter additional information to complete the window. For additional information, refer to the topics on Open, Shared, WPA-PSK, and WPA Authentication.

5After completing the security information, click OK.

The following subsections describe the security windows for each authentication type.

3-12 WU830G