Moxa Technologies CP-168U user manual Sco

Software Installation

5.You can use Moxa diagnostic utility to verify the driver status.

#cd /moxa/mxser/utility/diag

#./msdiag

== MOXA Smartio/Industio Family Multiport Board Status Utility(1.1) == Tty Device Major Number= 30.

Callout device Major Number= 35.

Board 1 : CP-168U series (BusNo=2, DevNo=13)

Port 1: 0xac00, max. baud rate = 230400 bps.

Port 2: 0xac08, max. baud rate = 230400 bps.

Port 3: 0xac10, max. baud rate = 230400 bps.

Port 4: 0xac18, max. baud rate = 230400 bps.

Port 5: 0xac20, max. baud rate = 230400 bps.

Port 6: 0xac28, max. baud rate = 230400 bps.

Port 7: 0xac30, max. baud rate = 230400 bps.

Port 8: 0xac38, max. baud rate = 230400 bps.

6.You can use Moxa terminal utility to test tty port.

#cd /moxa/mxser/utiltiy/term

#./msterm

SCO

The SCO driver for MOXA’s multiport serial boards supports the following products:

!Universal PCI Boards: CP-168U, CP-104UL, CP-104JU

!PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI

!ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS

Follow the steps below to install the driver under SCO. Moxa provide the following SCO Version:

!SCO OpenServer

!SCO UnixWare 7

!SCO UnixWare 2.1

The following steps are using CP-168U under SCO OpenServer as an example. If you want to install under SCO UnixWare 7 or SCO UnixWare 2.1, the installation procedures

Smartio CP-168U User’s Manual 3-49