Software Installation

12.Insert the Moxa Driver CD into the CD-ROM

drive, and then specify the location of the file 11. Wait while the wizard installs the software. as Software\Win2K-XP-2003as shown

below (change the drive letter, if needed). Click OK to continue.

13.Click on Next to continue with the installation.

12.After all files have been copied to the system, the Completing the Found New Hardware Wizard window will open to indicate that it has finished installing “Port 0.” Click on Finish to install the board’s second port.

Smartio CP-168U User’s Manual 3-15

Page 31
Image 31
Moxa Technologies CP-168U user manual Software Installation