HP manual Installing the Egram Enhanced Graphics RAM Module C160/C180, Rotating the Eisa Fan

Changing Your Workstation’s Hardware Configuration

Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180)

Installing the EGRAM (Enhanced Graphics RAM)

Module (C160/C180)

Before installing the EGRAM module, perform the procedure in Removing the Main Tray Assembly on page 122.

Perform the following steps to add the EGRAM module to your workstation:

1Press the release clip and rotate the EISA fan, as shown in Figure 42.

Figure 42 Rotating the EISA Fan

130