Changing Your Workstation’s Hardware Configuration
Installing an EISA, PCI, or GSC Option Board
Installing the Option Board
Follow these steps to install a GSC, EISA, or PCI board into your worksta- tion:
1Remove the main tray assembly as described in “Removing the Main Tray As- sembly” earlier in this appendix.
2Press the fan release clip and rotate the fan, as shown in Figure 50.
Figure 50 | Rotating the Fan |
3Remove the screw from the EISA retainer, and remove the EISA retainer, as shown in Figure 51.
EISA Retainer
Figure 51 | Removing the EISA Retainer |
141