NOTICE:
Figure 38
Changing Your Workstation’s Hardware Configuration
Removing the Main Tray Assembly
Removing the Main Tray Assembly
Perform the following steps to remove the main tray assembly:
1Power off the system, the monitor, and any peripheral devices. Unplug the system unit power cord and the power cord of any peripheral devices from ac wall out- lets. Disconnect the power cord from the system unit.
There is no need to manually shut down the
2Disconnect cables from any peripheral devices.
3Attach a
4Completely loosen the five thumb screws on the rear of the system unit, as shown in Figure 38.
Thumb
Screws
Thumb Screws
Removing Main Tray Assembly
122