HP C180 manual Removing the Eisa Slider and Retainer

Changing Your Workstation’s Hardware Configuration

Installing the EGRAM (Enhanced Graphics RAM) Module (C160/C180)

2Slide the EISA slider to the side to remove it, as shown in Figure 43.

3Remove the screw from the EISA retainer and remove it, as shown in Figure 43.

EISA Slider

		EISA Retainer
Figure 43	Removing the EISA Slider and Retainer
		4 Grasp the option board by the edge with both hands and pull it straight out.
		Remove all option boards, making note of which option slot each one was
		installed in.
		All boards must be replaced in their original slots or your system may not
NOTICE
		run properly.

131