Using Your Digital Data Storage (DDS) Tape Drive

DDS Tape Drive and Data Cassette Descriptions

 

Tape

Clean/

Meaning

 

 

 

 

 

 

Attention

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Activity — load or unload

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Activity — read or write

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cartridge loaded

 

 

 

 

 

 

 

 

 

 

 

Any

 

 

 

Cleaning needed

 

 

 

 

 

 

 

Any

 

 

 

Fault

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Key

OFF

Steady Green

Steady Amber

Flashing Green

1/2 sec on, 1/2 sec off

Pulsing Amber

Fast Flash Green

1/4 sec on 1/4 sec off

Figure 19

DDS-DC (Later Model) and DDS-2 Tape Drive LED Display Codes

LED Warning Conditions

The following sections describe actions to take if the LEDs indicate a warning condition.

High Humidity If the LEDs display the high humidity signal, the humidity is too high. The drive does not perform any operations until the humidity drops.

Self-Test (Failure) If the LEDs display the self-test (failure) signal, a fault was diagnosed during the self tests. Note the pattern of the pulses and contact your local service representative.

Media Wear (Caution) Hewlett-Packard DDS drives continually monitor the number of errors they have to correct when reading and writing to a tape to determine tape wear and tape head cleanliness. If excessive tape wear or dirty tape heads are suspected, the drive warns you by displaying the Media Wear (Caution) signal on the LED indicators.

48