NOTICE:

CAUTION:

ATTENTION:

Changing Your Workstation’s Hardware Configuration

Replacing the Battery

4Insert the new battery in the same orientation as the old one. (Use only HP part number 1420-0314 or equivalent.)

If you cannot gain access to the battery, you may need to remove an option board. Refer to “Installing an EISA, PCI, or GSC Option Board” earlier in this appendix for information on accessing the option boards.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.

Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type recommandé par le constructeur. Mettre au rébut les batteries usagées conformément aux instructions du fabricant.

5Follow the instructions in “Replacing the Main Tray Assembly,” earlier in this appendix, to close and restart the system.,

147