Changing Your Workstation’s Hardware Configuration

Installing Storage Devices

CAUTION:Be sure to support the storage tray from underneath while sliding it out of the system unit.

Proceed to one of the following sections in this appendix to install your storage device in the storage tray:

•Installing a CD-ROM or a DDS-Format Tape Drive

•Installing a Floppy Drive

•Installing a Hard Disk Drive in Position 3 or Position 4

Installing a CD-ROM or a DDS-Format Tape Drive

Perform the following procedure to install a CD-ROM or DDS tape drive in the storage tray:

1Remove the disk filler panel from the top location of the bezel by using a coin or other flat, blunt object to pry it from the front, as shown in Figure 28.

Figure 28

Removing a Disk Filler Panel

109