
Changing Your Workstation’s Hardware Configuration
Installing Storage Devices
Configuring a Hard Disk Drive
This section describes how to add a hard disk drive to your system as a file system using SAM. If you installed a new hard disk drive, follow these instructions to make your new disk usable as a file system. For more infor- mation about configuring a hard disk drive, refer to the System Administra- tion Tasks manual.
This procedure requires you to log in as root. If you cannot log in as root, contact your system administrator.
1Log in as root.
2In a terminal window, enter the following command:
sam RETURN
NOTICE:SAM (System Administration Manager) is a utility that performs system administration tasks using a windows graphical user interface.
3The System Administration Manager window opens.
4The Peripheral Devices window opens.
5The Disks and File Systems window opens.
The following screen message appears:
Scanning the system’s hardware...
The
6From the Actions menu, click on Add a Hard Disk Drive.
7The Select a Disk to Add window opens with a list of unused disks. Highlight the hard disk drive you want to add to your system.
8Click on OK.
120