Moxa Technologies CP-168U user manual Software Installation, Configuring the Board and Ports

Software Installation

“Serial Programming Tools”), a PComm utility, or HyperTerminal, to transmit/receive data, as well as Remote Access Service to provide dial-up networking capabilities.

Configuring the Board and Ports

Follow the procedures given below to re-configure the COM number for the ports of installed boards and drivers under Windows 95/98.

In addition to following the procedures listed below, you may also click on [Start] "

[Programs] " [MOXA Utility] " [MOXA Smartio/Industio Configuration Panel] " [Property] " [Port Setting].

Since this is a Universal PCI or PCI board, once a new board is added, or an existing board is removed, the board’s configuration will be automatically added or removed by the operating system when you restart the PC.

1.Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and then click on the plus sign to the left of Moxa Smartio/Industio multiport board.

Smartio CP-168U User’s Manual 3-29