Moxa Technologies Accessible IP, Any host on a specific subnetwork can access the EDS-726

EDS-726 Series User’s Manual Featured Functions

Accessible IP

Moxa EDS-726 uses an IP address-based filtering method to control access to EDS-726 units.

Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent unauthorized access. Access to EDS-726 is controlled by IP address. That is, if a host’s IP address is in the accessible IP table, then the host will be allowed access to the EDS-726. You can allow one of the following cases by setting this parameter:

yOnly one host with the specified IP address can access the EDS-726

E.g., enter “192.168.1.1/255.255.255.255” to allow access to just the IP address 192.168.1.1.

yAny host on a specific subnetwork can access the EDS-726

E.g., enter “192.168.1.0/255.255.255.0” to allow access to all IPs on the subnetwork defined by this IP address/subnet mask combination.

yAny host can access the EDS-726

Disable this function by not checkmarking the “Enable the accessible IP list” checkbox. The following table shows additional configuration examples:

Allowable Hosts	Input format
Any host	Disable
192.168.1.120	192.168.1.120 / 255.255.255.255
192.168.1.1 to 192.168.1.254	192.168.1.0 / 255.255.255.0
192.168.0.1 to 192.168.255.254	192.168.0.0 / 255.255.0.0
192.168.1.1 to 192.168.1.126	192.168.1.0 / 255.255.255.128
192.168.1.129 to 192.168.1.254	192.168.1.128 / 255.255.255.128

3-5