EDS-726 Series User’s Manual | Introduction |
Overview
Network planning is easy and flexible with EDS-726, which has a modular design that lets you install up to 2 Gigabit ports and 24 fast Ethernet ports in one switch. Choose from three 1-port Gigabit modules with copper or fiber optic connectors, and eight 4-port Fast Ethernet modules with copper or fiber optic (SC/ST) connectors. EDS-726 is suitable for any industrial application, and leaves room for future expansion. Features include an angled LED display for convenient viewing from any vertical angle, pluggable CompactFlash for configuration back-up, network redundancy, and intelligent network management. EDS-726 provides more flexibility, reliability, and application-oriented functions to meet the demands of any harsh industrial application.
Package Checklist
MOXA EDS-726 is shipped with the following items. If any of these items is missing or damaged, please contact your customer service representative for assistance.
y1 MOXA EDS-726 modular switch system or Interface Module
yHardware Installation Guide
yCD-ROM with User’s Manual and Windows Utility (for EDS-726 modular switch system only)
yMoxa Product Warranty booklet
yRJ45 to DB9 Console port cable (for EDS-726 modular switch system only)
NOTE: Please notify your Moxa sales representative if any of the above items is missing or damaged.
Features
Industrial Networking Capability
yRedundant Gigabit Ethernet Ring Capability (recovery time < 300 ms at full load)
yIGMP Snooping and GMRP for filtering multicast traffic from industrial Ethernet Protocols
ySupports IEEE 802.1Q VLAN and GVRP protocol to ease network planning
ySupports QoS—IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
ySupports 802.3ad, LACP for optimum bandwidth utilization
ySupports IEEE 802.1X and SSL to enhance network security
ySNMP V1/V2C/V3 for different levels of network management security
Designed for Industrial Applications
yModular Managed Switch with up to 26 ports. Choose from the following modules:
¾Three 1-port Gigabit modules, with 10/100/1000BaseT(X) (RJ45 connector), or 1000BaseSX/LX (SC connector)
¾Eight 4-port fast Ethernet Modules with a combination of 10/100BaseT(X) (RJ45 connectors) and 100BaseFX (Single/Multimode, SC/ST connectors)
yCompactFlash card for upgrading firmware and loading or saving configurations
yLong-haul transmission distance of 40 km or 80 km
yRedundant, dual DC power inputs
yIP 30, rugged high-strength metal case
yDIN-Rail or panel mounting ability
yBandwidth management to prevent unpredictable network status
