Moxa Technologies EDS-726 Trunk Group Maximum of 4 trunk groups, Trunk Type, Trunk Table

EDS-726 Series User’s Manual				Featured Functions
	Trunk Group (Maximum of 4 trunk groups)
	Setting		Description		Factory Default
	Trk1, Trk2, Trk3, Trk4		Display or designate the Trunk Type and Member		Trk1
			Ports for Trunk Group 1, 2, 3, or 4.
	Trunk Type
	Setting		Description		Factory Default
	Static		Designated Moxa proprietary trunking protocol		Static
	LACP		Designated LACP (IEEE 802.3ad, Link		Static
			Aggregation Control Protocol)
	Member Ports/Available Ports
	Setting		Description		Factory Default
	Member/Available		Use Up/Down buttons to add/remove specific ports		N/A
	Ports		from available ports to/from trunk group.
	Check box	Check to designate which ports to add or remove.			Unchecked
	Port		Port number		N/A
	Port description		Displays the media type for each module’s port		N/A
	Name		Max. 63 Characters		N/A
	Speed		Indicates the transmission speed (100M-Full,		N/A
			100M-Half, 10M-Full, or 10M-Half)
	FDX Flow Control		Indicates if the FDX flow control of this port is		N/A
			“Enabled” or “Disabled.”
	Up		Add designated ports into trunk group from		N/A
			available ports.
	Down		Remove designated ports from trunk group to		N/A
			available port.

Trunk Table

Setting	Description
Trunk Group	Displays the Trunk Type and Trunk Group.
Member Port	Display which member ports belong to the trunk group.
Status	Success means port trunking is working properly.
	Fail means port trunking is not working properly.
	Standby means port trunking is working as a standby port. When there
	are more than eight ports trunked as a trunking group, the 9th port will
	be the standby port.

3-15