Moxa Technologies EDS-726 user manual Management Vlan ID, Port Pvid, Port Fixed Vlan List Tagged

EDS-726 Series User’s Manual Featured Functions

To configure EDS-726 VLANs, use the VLAN Port Setting page to configure the ports.

Port Type

Setting	Description	Factory Default
Access	This port type is used to connect single devices without
	tags.
Trunk	Select “Trunk” port type to connect another 802.1Q	Access
	VLAN aware switch or another LAN that combines
	tagged and/or untagged devices and/or other
	switches/hubs.

ATTENTION

For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling Port,” and “Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to transmit all packets of different VLANs to different EDS-726 units.

Management VLAN ID

Setting	Description	Factory Default
VLAN ID	Set the management VLAN of this EDS-726.	1
ranges from
1 to 4094
Port PVID
Setting	Description	Factory Default
VID range from 1	Set the port default VLAN ID for untagged devices that	1
to 4094	connect to the port.
Port Fixed VLAN List (Tagged)
Setting	Description	Factory Default
VID range from 1	This field will be active only when selecting the “Trunk”	None
to 4094	port type. Set the other VLAN ID for tagged devices that
	connect to the “Trunk” port. Use commas to separate
	different VIDs.
Port Forbidden VLAN List
Setting	Description	Factory Default
VID range from 1	This field will be active only when selecting the “Trunk”	None
to 4094	port type. Set the VLAN IDs that will not be supported
	by this trunk port. Use commas to separate different
	VIDs.

3-41